Thermal Technology vs. Basic Blowing Air

January 3, 2025 by Dustin Pierce

Let us at Best Option Restoration North OKC explain how adding heat changes the game.  

Logo for

When the temperature of the air is raised, the amount of moisture in the air (GPP) doesn’t change so the vapor pressure doesn’t change, but the maximum possible vapor pressure increases (more grains of water can exist in the warmer air). Liquid water does have a vapor pressure, and it is tied to temperature. If you raise the temperature of the water in the wet material, you raise the vapor pressure.

Since the equilibrium moisture content (EMC) of wood and other hygroscopic materials is linked to the relative humidity of the air, it is a good guide to the eventual lowest attainable moisture content during drying. Air at 80°F and 23% RH has a humidity ratio of 35 gpp and will eventually dry wood to an EMC of 4.9%. Air at 100°F and 23% RH has a humidity ratio of 65 gpp and will eventually dry wood to an EMC of 4.7%, but the evaporation rate will be much faster because the warmer surfaces will produce higher vapor pressure. The 100°F job will require closer monitoring for some of the heat-related issues for example warping or spiliting if not managed. Understanding how to fine-tune the evaporation rate can help guide equipment selection as the drying job progresses.

Vapor pressure differential drives evaporation. But temperature is one of the main controls over how fast it happens. The temperature at the surface of a wet material determines the saturation vapor pressure. The higher this temperature is, the higher the vapor pressure will be. The vapor pressure in the air can be determined by its temperature and RH (vapor pressure can be found on the psychrometric chart next to grains per pound). Assuming adequate airflow, the bigger the difference is between these two vapor pressures the faster the evaporation rate. Conversely, the smaller the difference is, the slower the evaporation rate. If the ambient air is already saturated, the material will not dry. When using heat to dry materials, the goal is to maximize the vapor pressure differential by adding heat to provide sufficient evaporation without excessive temperature rise rather than focusing on controlling the moisture content of the air through dehumidification.

January 3, 2025 by Dustin Pierce

Disaster Restoration Company techs are experts in this field of Thermal (Heat) Technology. Call us today and we’ll walk you through the process as we are on scene.

Newer Post >

How to Choose Water Damage Restoration in Hamilton, OH

By Best Option Restoration of BWC • November 12, 2025
Expert water damage restoration in Hamilton, OH handles pipe bursts, floods, and storm damage with IICRC certified technicians for fast property protection.
A moisture meter reads 46.4%, near a crowbar, on a dusty surface, assessing for potential water damage.

Water Damage Restoration: How Immediate Action Saves You

May 29, 2025
May 29, 2025 by Dustin Pierce
Logo: Orange circle with text

How to Choose the Best Restoration Company in Oklahoma City

May 2, 2025
1. Verify Certifications and Training
Five gingerbread houses on a snowy surface with string lights in the background.

Does Homeowners Insurance in Oklahoma City Oklahoma Cover Water Damage?

April 1, 2025
Understanding Water Damage Coverage in Oklahoma City, OK, Homeowners Insurance
Person wearing pink gloves scrubbing bathroom tile with a green brush.

Why Mold Remediation Should Be a Priority After Water Damage

March 3, 2025
The Risks of Mold in Your Home
Mold infestation inside a wall, revealing studs and electrical wiring. Grey and black mold present.

Why DIY Water Damage Cleanup Isn’t Worth the Risk

March 3, 2025
The Complexity of Water Damage
Flooded residential area; water surrounds a two-story house with dormers, bushes, and trees.

Essential Tips for Successful Flood Restoration and Recovery

March 3, 2025
Immediate Steps After a Flood
Logo for Best Option Restoration: Orange and blue circle with a smiling blue water droplet; white text.

The Ultimate Guide to Recovering From Water Damage in Oklahoma City Oklahoma

February 3, 2025
Initial Assessment and Safety Precautions